Friday, November 24, 2017

November 2017 Range Day With My Sons





A big THANK YOU to my buddy and his family for allowing us to use this beautiful rural property!! 

The sons and I go out for a bit of well-deserved gun-play and tom-foolery. 

First time out using the Harris bipod and Vortex Strikefire 2 AR15 optic. 

Full-value constant wind from right to left all day. 

Long-range shooting at 6" steel target at approx 300 yards. 

We were lucky we hit anything, but I think we did OK all things considered. 

We only once got the cops called on us! Sometimes you're golden, man. That's all I got to say.

Range day:

-S&W AR15 carbine-5.56/.223 NATO w/red dot optic
-AK47
-Remington 700 in 22.250 w/12 power scope
-Russian Mosin-Nagant 7.62X54R
-Ithaca 1911 .45ACP
-Glock23
 

The wind was kicking our ass during rifle fire.  I couldn't hit anything using the AR15's red dot optic as I haven't zeroed it or done my homework on it. (It was first-time for optics use and I kinda needed to know where it was out-of-the-box.)  It has no magnification and just puts a lighted dot on target thru the reticle.  I switched to the iron sights and did much better.

The fancy Rem700 and scope has been dialed in for years by the previous owner (wife's uncle, RIP) and I have never dared to adjust it.  It is straight shooting and hits hard.  22.250 is a "varmint round" similar to 5.56...a small .22 cal pill with a metric shit ton of powder behind it.

The Mosin-Nagant is a WW2 peasant rifle from Soviet Union.  A .30 cal shoulder thumper.  Primitive, cheap to own and shoot, but can be accurate if shooter does his part and doesn't mind recoil.
 

#2 son's AK47 I don't and have never really liked or enjoyed.  He likes it, so that's all that matters.  I prefer the AR's refinements and am more comfortable and experienced with the platform.


The GlockG23 (40S&W):   We put several hundred 9mm rounds thru it using the Lone Wolf 9mm conversion barrel and Lone Wolf stainless guide rod/recoil spring as the only changes to the gun. Didn’t change the extractor and had no extracting problems. We even experimented loading 9mm pills into the 40sw mags. I had no hiccups, but my oldest son had one feeding failure using the 40sw Glock mags. 9mm Glock mags ran perfect.


The Harris bipod kicks ass. It's nice to be able to quickly move it from the AR15 to the Remington 700, but I'm thinking having more than one would be even more betterer.
 

It was a good day with my sons.  I don't worry about them, and I couldn't be more proud of them.  They are fine young men and handle themselves accordingly.


Wednesday, February 8, 2017

Crazy Good?


I've noticed that whenever a trucking company has a slogan emblazoned on their equipment touting how awesome they are...like:

"Destination Excellence"
"All We Care About Is You And Your Babies And Kittens And Puppies"
"We Kick Ass"
"We Are Safe As Fuck"

... the truth is usually the direct opposite of said slogan. 

This clown was sooooo "Crazy Good" he rode the ass of the old lady in the Prius for three miles! 

I loves my job, and your safety and convenience is of the utmost importance to me.

Honest.

CCCP My Ass!


Seen on the road recently. 

WTF? 

What's next?  ISIS Trucking?  NAZI Motor Freight Lines?

I hailed the driver on the CB to get an explanation, but got no response.

This Bolshevik didn't even have a CB antenna...

I'm OK with Russians. In fact, I admire the silly rough-neck bastards. It's the whole Soviet Union/CCCP/Gulag commie thing I have a problem with. I wanted to ask him, "If the Soviet Union was so great, why are you here in the evil capitalist USA? Oh...that's right. The Soviet Union collapsed and doesn't EXIST any more!"

I think most Americans see the hammer and sickle as some sort of cool design they've seen college pukes waving or wearing on Che Guevara shirts, and have no idea what has been done in its name. To me, it's no different than a Nazi swastika.


Wednesday, January 11, 2017

Rich Logistics fAle






A little background:

I recorded this last night coming south from Fort Wayne, Indiana on I-69.  


A severe thunderstorm was going through the area with 30mph sustained cross-winds, and frequent gusts up to 60mph, heavy rain, and some hail.  I thought I was driving in a tornado, and I was fighting to keep it on the road.  It was probably the worst cross-wind I had ever experienced.

I'm in a loaner tractor, which is not set up to install a CB radio (no antenna), so I have no idea what's going on in front of me beyond my field of vision, and I have no way of communicating with other drivers other than lights/horns.

At the time of the video, the rain had subsided a bit, but the winds remained.  


I had slowed to about 45mph.  My emergency flashers are on.  Visibility was poor, and I came up on this Rich Logistics truck that had come to a complete stop and was blocking the right lane of the Interstate.  I saw the situation in plenty of time, but I had no where to go as the left lane was full of traffic.

Once I came to a complete stop, I kept my eyes glued to my rear-view mirrors.  Being the Negative Nancy that I am, I was sure I was going to be blasted in the rear end by another inattentive driver.  It was a nightmare situation.

For the life of me, I can't figure out what Rich Logistics was doing.  Why was he not pulled completely off to the shoulder and off the travel lanes?  Nobody was in front of him or blocking him in any way that I could see.  If he was having mechanical problems, I cannot foresee a scenario where he wouldn't be able to at least get his rig completely off the roadway.  As you can see in the video, the Rich Logistics truck IS moveable...so why was he stopped and blocking the Interstate?

I think he panicked because of the weather conditions, and decided to come to a screeching halt exactly where he was...a horrible decision.

I think the lessons here are:

-scan far enough ahead and drive the conditions.
-make wise decisions which won't make matters worse.
-if one decides conditions are impossible, get COMPLETELY off the road as soon as possible.

-the side skirts on our trailers are EXTREMELY bad news in last night's conditions. I believe that if I had been empty, I wouldn't have been able to keep it on the road.

BTW...I removed the audio for the video because I figured you didn't want to hear the screaming and cussing!

Friday, December 9, 2016

Your Public Service Announcement For Today





The first and last photos were taken in a construction zone where trucks are required to use the left lane only.

If you can't see my grille or both of my headlights in your mirrors, you probably shouldn't change lanes and come over on me.

Turn signals are nice, but they don't grant you the right-of-way...especially when you signal late and I am going faster than you.

That gap I'm maintaining between my rig and the vehicle in front of me is there for a reason, and that reason has nothing to do with you changing lanes at the last second.

I prefer not to kill you.  OK?  Thanks.

Friday, December 2, 2016

Making New Bushmaster GI AR 15 Magazines Not Suck So much

I recently purchased ten new Bushmaster 30-round GI-style metal AR-15 magazines.

I found one of them to feel sorta "crunchy" and to have a feeding problem in that the follower would hang up about halfway through the magazine.

I popped the mag apart and found that a sloppy/oversized spot weld inside the magazine was catching on the follower and stopping its upward progress.

Out-fucking-standing!  This meant...being finicky and anal about this kinda thing...I would have to completely disassemble all ten mags and inspect them.

I found five out of ten of the mags to have this spot weld problem. 

These are the spot welds and their locations inside the mag.  The welds pictured are not the problem welds.  The problem welds were much larger and more pronounced.

So, I took a long narrow file and knocked down all the spot weld burrs I could find...and reach.

Then, I took a look at all the plastic followers.  I found some minor mold flashing on all of them, and smoothed them down with a hand file.




My last step was to lightly oil the mag springs and the inside walls of the mags themselves.

I slapped all ten mags back together, and worked all of them up and down vigorously until I was tired and satisfied and needed a smoke.

The mags seem smoother now and not crunchy at all.

It's a damn shame Bushmaster couldn't be assed to do this kinda thing before they put these mags on the market. 

Unless I find a metric shit ton of them for almost free, I won't be buying any more Bushmaster mags. 

I guess I'll stick to Magpul.  I haven't had any issues with their shit.

Yet.